| RAW
MATERIAL |
| Using
brass coated steel wires with diameter of 1.0mm or 1.2mm |
|
 |
|
|
| DRAWING |
Wires
drawn through dies in order to produce the final
diameter of 0.160~0.177
Passing through each die, wires get thinner with higher
tensile strength |
|
 |
|
|
|
| Over 20 dies are used for drawing process.
|
|
|
| INSPECTION |
| Because
of close tolerance finishing, highly accurate measuring
devices such as laser scanning micrometer and tensile
tester are employed at inspection. |
|
 |
|
|
| FINISHED
PRODUCT |
| The
resultant saw wire are packed and delivered as per
Customers' requirements. |
|
 |
|
|
